Chicago - St. Louis Lincoln Corridor to begin higher speed running

Amtrak Unlimited Discussion Forum

Help Support Amtrak Unlimited Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Bob Dylan

50+ Year Amtrak Rider
AU Supporting Member
Joined
May 31, 2009
Messages
26,759
Location
Austin Texas
After spending Billions, effective July 7according to a Post on trainorders, the Missouri Trains AND #21/#22( not originally included) will be allowed to run @ 90mph in certain Blocks on the Cortidor between Chicago and St. Louis.

The Goal is to eventually up it tp 110 MPH, but just when this will happen( if Ever??)is Blowin'in the Wind."
 
Last edited:
From NYC to New Haven, high speed rail is anything faster than an ice cream truck.
Well, if they have gotten around to raising the speeds again in NY State after PTC going on line then that part is as fast as the Lincoln Corridor pieces at 90mph :)
 
Why do we have to be so pessimistic even when we hear good news? I don't understand this place...

I'm split. There is a healthy amount of pessimism here, but I think when good things happen, there is plenty of celebrating.

I followed (via hsrail.org) this project, and it really seems to be a snail's cause.
 
Potentially 110mph service will begin on May 2nd, 2023. This past week a southbound/northbound 110mph test was completed and it was supposedly the last one.
Where did you hear this? I just googled for news about this, and all I got were old articles stating that the train was increasing speeds to 90 mph from late 2021.
 
This is the Midwest and I realize there are grade crossings unlike the Northeast Corridor, but get the trains running at 110 mph. This seems to have taken forever.
It has taken a while, but one must consider that somebody had to be the first one to devise a way for I-ETMS to work at speeds over 90 mph. If it works, it just means that any other corridor that attempts to upgrade to 110mph will have one less major obstacle to overcome.

Now, to get the Chicago-Joliet segment onto the Rock Island and find a faster path between Granite City and St. Louis. Then, to double track the whole route.
 
...has anyone noticed the fences they put along these high-speed tracks? Really nice! Wish I had them in my yard. Back to the hi speed taking so long and the pessimism, it was long ago that there was a presentation in BLN about the hi speed train. Finally there was an announcement that there would be hi speed along some segments. Meanwhile, in Bloomington/Normal, there was talk about putting up an overpass for pax to go from the depot side to the other side. Had it been done at that time, it would not have cost the city anything. "They", whoever "they" are, decided they wanted an underpass. That still hasn't happened. Everything except inflation just moves too slowly.
 
Where did you hear this? I just googled for news about this, and all I got were old articles stating that the train was increasing speeds to 90 mph from late 2021.
Union Pacific employees who like spilling the beans. Granted this is provided the tests went well, which we don’t know.
 
Just as an aside, it's absolutely ridiculous to have spent so much money on speed improvements and capacity upgrades to then still have to fight for a fifth round trip. Should be at least double that.
 
If more of the elected legislators, and not just the staffers or lobbyists, actually bothered to take the train to Springfield rather than driving, this might have been accomplished a long time ago.
 
Are we sure that means a fifth "Lincoln" roundtrip and not just allowing the Texas Eagle to run at higher speeds as well as the four Lincoln roundtrips?
 
IIRC the deal with UPRR calls for the number of trains to be capped at 5 round trips (and not all of those permitted 110 mph) until completion of double-track. That will permit 9 round trips. I have not heard anything about UP enforcing the limited number of trains at 110 lately. To get out from under these limitations I think that constructing a publicly owned, grade-separated 220 mph route via Champaign and Springfield, as studied by High-Speed Rail Alliance and IL DOT, would make the most sense. 9 trains on double-track 110 mph Chicago-Bloomington-Springfield could be part of the deal.
 
IIRC the deal with UPRR calls for the number of trains to be capped at 5 round trips (and not all of those permitted 110 mph) until completion of double-track. That will permit 9 round trips. I have not heard anything about UP enforcing the limited number of trains at 110 lately. To get out from under these limitations I think that constructing a publicly owned, grade-separated 220 mph route via Champaign and Springfield, as studied by High-Speed Rail Alliance and IL DOT, would make the most sense. 9 trains on double-track 110 mph Chicago-Bloomington-Springfield could be part of the deal.
The agreement has been modified several times now. Originally the Eagle wasn’t supposed to be included, now it will hit 100mph. Skimming thru the EIS documents there’s a possibility of a train that can be added that serves Chicago-Springfield only now. There’s no reason why more trains can be added as more capacity upgrades are built.
 
Actually things has gone backwards. I rode from Normal to Chicago 3 or 4 years ago and there was about a 50 mile stretch north of Normal it ran 110 mph. And it did show that on my phone app. Then after new signaling was installed Union Pacific indicated the new signaling would only allow 90 mph safely. And I rode it last year twice with it getting up to 90 but only in certain spots? So now a few years later we may get back up to 110 mph after billions were spent on Union Pacific tracks (concrete ties from Alton to Joliet and signals from the high speed money. Actually Illinois got more money as Wisconsin turned down the money so President Oboma gave it all to Illinois. Actually going from 79 to 90 mph along with several spots not being able to run that fast, little time was gained! 110 mph sounds great, but with all the time slowing down for freights to get on siding that is if a long freight will fit on siding,if not then Amtrak is put on siding or if freight went into siding Amtrak has to stop at the next signal for freight finish pulling thru. This happens often on the western Union Pacific and BNSF tracks. So higher speed will work if freights always get on the siding so Amtrak does not have to slow down and no more longer freights. I believe we know when that may happen! But I will still ride Amtrak as I have for over 40 years mostly on the western long distance trains. but those roomette prices are driving me crazy.
 
Back
Top